What you should know before ordering
About our lights
As previously mentioned, we are not a retail company. We are a running events company that has been putting on trail races for the past 15 years. The company we started in 2011 is Southeastern Trail Runs. We have just this year turned the Southeastern Trail Series over “younger” family members. However, we still are Race Directors of the Southern States 200 Mile Trail Race, Endless Mile 60, 12, 24, 48 & 72 Hour Race, and the Run Forest Run, a 317 race across the Gulf Coast then north to a central Alabama finish.
As mentioned earlier, several of our races have overnight aid station. The Aid Station at Endless Mile is open for 72 straight hours. Southern States 200 is a point-to-point race along the Pinhoti Trail from near Dalton, Georgia to the top of Mt Cheaha, highest point in Alabama. Runners take as long as 100 hours to reach the end. It has 15 full aid stations serving full meals. All but the Cave Spring aid station are located at trailheads or just on the side of a very secluded road. Several later aid stations are open as long as 62 hours. They need bright lights to perk up very tired runners over the 200-mile race. Also, the Blood Rock 100-mile and 50-mile race have 5 remote aid stations lasting over two nights.
The commercially available 500 to 1000 Lumin globe lights are far too expensive for a small running company to afford. That’s why we started making our own lights. They are as simple as they can possible be. It will require about 3 minutes to assemble the light and another 5 minutes to set it up. The lights do require a bit of “guy-line” adjustment to be sure they are straight. The lights are relatively easy to set up solo but it is easier with help.
The lights are not made in some foreign mass production plant. The globes are made right here in Chelsea, Alabama. The assembly is done in my basement. I am not kidding. Each light in built to order. If you are interested in purchasing one of our lights, email us. We will send you a list of options and explain which options might be best for you. We will also send you an order form.
A little more info
The 800 Watt light unit weighs 30 lbs. when assembled. That is a lot of weight to be sitting on the top of an aluminum pole, especially when the pole is extended to 20 feet. We only use the standard poles for our 500-watt, and 800-watt lights. The 500 is considerably lighter at about 25 lbs. and is no trouble to set up alone. The 800-watt gets a bit touchy! I recommend using two additional pieces of tubing around the iron stake the pole sits on to help stabilize the setup of the pole. PVC pipe is the best option I have found. It’s cheap and readily available.
First, drive the steak in the ground making sure it is pointed straight up. It should be driven in the ground at least a foot. I would suggest using a plumbline to be sure it is not leaning. Next, place a smaller piece of PVC pipe directly over the stake. The pipe should not be longer longer than the iron rod. You may want to make it even shorter. Then place a second, larger piece of PVC over the first. Now, place the telescoping pole over the two pieces of pipe.
In order to get the pole to go down over the rod and pip, you will need to release the cam clamp on the top of the first section of the pole. Then slide the inside poles up as far as necessary to clear the top of the rod and pipe.